Dell 3.5-Inch Drive Tray for MD1280, PS6610, SC180, SC280 and SCv2080 Enclosures
Enterasource is proud to present a 3.5-inch drive carrier that our inventory record scopes across five dense Dell storage enclosures spanning three product brands: PowerVault MD1280, EqualLogic PS6610, and Compellent SC180, SC280 and SCv2080.
The Carrier Crosses Brands. The Drive Support Does Not.
A list like this happens when one chassis design is sold under several storage brands. The mechanical carrier is common because the chassis is common. What is not common is the firmware qualification behind each brand — the array decides which drives it will accept, and a carrier that fits perfectly does nothing to change that.
So use this page for the mechanical question only: will the sled go into the enclosure and latch. Take the supported drive list from your array's own compatibility documentation.
Confirm the Enclosure, Not the Controller
These are all dense, high-bay-count enclosures. Read the model from the enclosure chassis itself rather than from the storage system name in your management console, because the two are not always the same string.
Important Notice: empty tray only. No drive, no screws, no interposer and no enclosure are included.
